Catalogue - Cutting Wheel
Cutting Wheel
Long-lasting, high-performance bonded abrasive cutting wheels for general metal, stainless steel, iron, and structural steel. Manufactured to EN 12413 and ANSI B7.1 safety standards. Available in Black (long-life) and Green (extra-fast cut) series, in Type 41 (flat) and Type 42 (depressed-centre) shapes, from 2″ up to 16″.
Black — longest lifespan and lowest cost per cut, ideal for general fabrication and production cutting.
Green — extra fast & smooth cutting ability, ideal for large-size workpieces, steel and stainless steel.
Choose your size on the product page, or ask us for bulk pricing.
Standard Series
Resin-bonded cutting wheels with double fiberglass reinforcement for safe high-speed operation.
SKU C2-1
2″ Cutting Wheel
Precision metal cutting on die grinders and high-speed rotary tools.
Compact 2″ bonded wheel with a tight 0.045″ kerf for slot cutting, sheet-metal trimming and fine fabrication in tight spots.
Key Features
- Slim 0.045″ kerf — clean, controlled cuts
- Up to 30,500 RPM — fits die grinders and rotary tools
- T41 flat — full reach into tight slots
Perfect for: jewellers, HVAC technicians and fabricators doing slot, trim and detail cuts on small parts.
Specifications
| Identification | SKU | C2-1 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 2″ (50 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 3/8″ (10 mm) | |
| Performance | Max RPM | 30,500 |
| Cuts | Steel, Stainless steel, Iron, Carbon steel, Copper, Brass | |
| Cut depth | approx. ¾″ | |
| Compatibility | Fits | Die grinder, pneumatic cut-off tool, high-speed rotary tool |
| Package | Pack size | 20 pcs |
Add to Cart →Request a Bulk Quote
SKU C3-4
3″ Cutting Wheel
Bolt, rod and exhaust cutting on 3″ pneumatic and electric cut-off tools.
A 3″ thin cutting wheel for pneumatic and electric cut-off tools — fast, controlled cuts on bolts, rods, sheet and exhaust pipe.
Key Features
- Thin 0.045″ profile — fast cuts, minimal burr
- Up to 20,400 RPM — matched to 3″ cut-off tools
- Steel, stainless and exhaust capable
Perfect for: auto body shops, exhaust techs and fabricators cutting bolts, rods, sheet metal and pipe.
Specifications
| Identification | SKU | C3-4 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 3″ (75 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 3/8″ (10 mm) | |
| Performance | Max RPM | 20,400 |
| Cuts | Steel, Stainless steel, Iron, Bolts, Rod, Sheet metal, Exhaust pipe, Copper, Brass | |
| Cut depth | approx. 1 ⅛″ | |
| Compatibility | Fits | 3″ pneumatic cut-off tool, electric cut-off tool |
| Package | Pack size | 25 pcs & 50 pcs |
SKU C4-1
4″ Cutting Wheel with Arbor 3/8″
Burr-free cuts on compact 3/8″-spindle angle grinders and pneumatic cut-off tools.
A 4″ cutting wheel with 3/8″ arbor for compact angle grinders and chop saws — clean cuts on rebar, conduit, bar stock and pipe.
Key Features
- 3/8″ arbor — fits smaller chop saws / grinders
- Thin kerf — fast cut, low material loss
- Steel and stainless capable
Perfect for: HVAC techs, automotive techs and general fabricators using compact 3/8″-spindle tools.
Specifications
| Identification | SKU | C4-1 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 4″ (100 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 3/8″ (10 mm) | |
| Performance | Max RPM | 15,200 |
| Cuts | Steel, Stainless steel, Iron, Sheet metal, Copper, Brass | |
| Cut depth | approx. 1 ½″ | |
| Compatibility | Fits | 4″ angle grinder (3/8″ spindle), pneumatic cut-off tool |
| Package | Pack size | 25 pcs |
SKU C4-2
4″ Cutting Wheel with Arbor 5/8″
Long-life cutting on the most common 4″ angle grinder spindle (5/8″).
A 4″ cutting wheel with 5/8″ arbor for standard angle grinders — clean, fast cuts on bar stock, conduit and pipe.
Key Features
- 5/8″ arbor — fits standard 4″ angle grinders
- Thin kerf — fast, low-burr cuts
- Steel and stainless capable
Perfect for: welders, automotive repairers and HVAC technicians running standard 5/8″-spindle 4″ grinders.
Specifications
| Identification | SKU | C4-2 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 4″ (100 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 5/8″ (16 mm) | |
| Performance | Max RPM | 15,200 |
| Cuts | Steel, Stainless steel, Iron, Sheet metal, Rebar, Copper, Brass | |
| Cut depth | approx. 1 ⅜″ | |
| Compatibility | Fits | 4″ angle grinder (5/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C45-5
4½″ Cutting Wheel
The everyday 4½″ wheel for steel and stainless — built for maximum disc life.
A 4½″ thin cutting wheel for the most common 4½″ angle grinders — daily-driver wheel for bar stock, pipe, sheet and angle iron.
Key Features
- Thin 0.045″ kerf — fast, clean cuts
- Up to 13,300 RPM — standard 4½″ grinder rating
- Steel and stainless capable
Perfect for: fabricators and tradespeople doing weld prep, sheet/plate cutting, rebar, conduit and exhaust work.
Specifications
| Identification | SKU | C45-5 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 4½″ (115 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 13,300 |
| Cuts | Steel, Stainless steel, Iron, Structural steel, Rebar, Conduit, Exhaust, Copper, Brass | |
| Cut depth | approx. 1 ½″ | |
| Compatibility | Fits | 4½″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C45-1
4½″ Cutting Wheel
Fast, burr-free cuts on stainless steel and high-alloy sections.
A 4½″ thin cutting wheel built for production cutting on standard angle grinders — long life on steel and stainless.
Key Features
- Long-life Black bond — lowest cost per cut
- T41 flat — full-depth, flush cuts
- Steel and stainless capable
Perfect for: stainless fabricators, food and pharma equipment shops and architectural metalworkers.
Specifications
| Identification | SKU | C45-1 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 4½″ (115 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 13,300 |
| Cuts | Stainless steel (INOX), High-alloy steel, Structural steel | |
| Cut depth | approx. 1 ½″ | |
| Compatibility | Fits | 4½″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C45-14
4½″ x 1/8″ x 7/8″ Depressed Centre Cutting/Grinding Wheel
Cut and lightly grind with one 4½″ wheel — angled and offset work supported.
A 4½″ × 1/8″ depressed-centre wheel (T42) that cuts and lightly grinds — handy for notching, weld prep and clean-up in one tool.
Key Features
- 1/8″ thick T42 — cuts and light grinding
- Depressed centre — angled cuts and notches
- Steel and stainless capable
Perfect for: welders and fabricators doing combined cutting, light grinding, weld notching and bevel work.
Specifications
| Identification | SKU | C45-14 |
|---|---|---|
| Shape | T42 Depressed Centre | |
| Dimensions | Diameter | 4½″ (115 mm) |
| Thickness | 1/8″ (3.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 13,300 |
| Cuts | Steel, Stainless steel, Iron, Structural steel, Rebar, Copper, Brass | |
| Cut depth | approx. 1 ½″ | |
| Compatibility | Fits | 4½″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
Add to Cart →Request a Bulk Quote
SKU C45-12
4½″ x 1/8″ x 7/8″ Flat Cutting/Grinding Wheel
Cut and dress welds with one 4½″ flat wheel — reinforced for lateral load.
A 4½″ × 1/8″ flat (T41) wheel for cutting plus light grinding — extra thickness for durability on bolts, plate and angle iron.
Key Features
- 1/8″ thick T41 — sturdy, dual-purpose
- Flat profile — full-depth flush cuts
- Cuts steel, stainless, rebar and plate
Perfect for: welders and metal fabricators dressing welds and cutting steel in the same workflow.
Specifications
| Identification | SKU | C45-12 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 4½″ (115 mm) |
| Thickness | 1/8″ (3.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 13,300 |
| Cuts | Steel, Stainless steel, Iron, Structural steel, Rebar, Copper, Brass | |
| Cut depth | approx. 1 ½″ | |
| Compatibility | Fits | 4½″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C5-5
5″ Cutting Wheel
Long-life 5″ everyday wheel for steel and stainless cutting.
A 5″ thin cutting wheel for 5″ angle grinders — fast, low-burr cuts on bar stock, pipe and sheet.
Key Features
- Thin 0.045″ kerf — minimal material loss
- 5″ size — extra reach over 4½″
- Steel and stainless capable
Perfect for: fabricators, repair shops, automotive techs and HVAC techs running a 5″ angle grinder.
Specifications
| Identification | SKU | C5-5 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 5″ (125 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 12,200 |
| Cuts | Steel, Stainless steel, Iron, Structural steel, Rebar, Copper, Brass | |
| Cut depth | approx. 1 ¾″ | |
| Compatibility | Fits | 5″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C5-2
5″ Cutting Wheel
Fast, clean cuts on stainless and heavy steel with INOX-grade chemistry.
A 5″ thin cutting wheel built for production work on standard 5″ angle grinders — long life on steel and stainless.
Key Features
- Long-life Black bond — low cost per cut
- T41 flat — full-depth flush cuts
- Steel and stainless capable
Perfect for: stainless fabricators, food and pharma equipment shops and architectural metalworkers.
Specifications
| Identification | SKU | C5-2 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 5″ (125 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 12,200 |
| Cuts | Stainless steel, High-alloy steel, INOX | |
| Cut depth | approx. 1 ¾″ | |
| Compatibility | Fits | 5″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C5-7
5″ x 1/8″ x 7/8″ Depressed Centre Cutting/Grinding Wheel
Cut and grind metal, iron and steel with one offset 5″ wheel.
A 5″ × 1/8″ depressed-centre (T42) wheel that cuts and lightly grinds — angled-cut access and weld-prep in one wheel.
Key Features
- 1/8″ thick T42 — cuts and light grinding
- Depressed centre — angled cuts and notches
- Steel and stainless capable
Perfect for: welders and fabricators handling cutting, weld notching and bevel work on a 5″ grinder.
Specifications
| Identification | SKU | C5-7 |
|---|---|---|
| Shape | T42 Depressed Centre | |
| Dimensions | Diameter | 5″ (125 mm) |
| Thickness | 1/8″ (3.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 12,200 |
| Cuts | Steel, Stainless steel, Iron, Structural steel, Rebar, Copper, Brass | |
| Cut depth | approx. 1 ¾″ | |
| Compatibility | Fits | 5″ angle grinder (7/8″ spindle) |
| Package | Pack size | 20 pcs |
SKU C5-6
5″ x 1/8″ x 7/8″ Flat Cutting/Grinding Wheel
Flat 5″ wheel that cuts and dresses welds on metal, iron and steel.
A 5″ × 1/8″ flat (T41) wheel for cutting plus light grinding — thicker body for durability on rebar, bolts and plate.
Key Features
- 1/8″ thick T41 — sturdy dual-purpose
- Flat profile — full-depth flush cuts
- Cuts steel, stainless and plate
Perfect for: welders and steel fabricators cutting and dressing welds in the same workflow.
Specifications
| Identification | SKU | C5-6 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 5″ (125 mm) |
| Thickness | 1/8″ (3.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 12,200 |
| Cuts | Steel, Stainless steel, Iron, Structural steel, Rebar, Copper, Brass | |
| Cut depth | approx. 1 ¾″ | |
| Compatibility | Fits | 5″ angle grinder (7/8″ spindle) |
| Package | Pack size | 20 pcs |
SKU C6-2
6″ Cutting Wheel
Long-reach 6″ wheel for clean cuts on structural and stainless steel.
A 6″ thin cutting wheel for 6″ angle grinders — extra reach for thicker bar stock, pipe and structural steel.
Key Features
- Thin kerf — fast, controlled cuts
- 6″ size — handles larger pipe and bar
- Steel and stainless capable
Perfect for: structural fabricators cutting plate, tube and stainless sections that out-reach a 4½″ wheel.
Specifications
| Identification | SKU | C6-2 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 6″ (150 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 10,200 |
| Cuts | Steel, Stainless steel, Structural steel, Plate, Tube, Rebar, Copper, Brass | |
| Cut depth | approx. 2 ⅛″ | |
| Compatibility | Fits | 6″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C6-5
6″ Depressed Centre Cutting/Grinding Wheel (1/8″ Thickness)
Cut and grind structural steel with one offset 6″ wheel.
A 6″ × 1/8″ depressed-centre (T42) wheel that cuts and lightly grinds — versatile for fabrication and weld prep on bigger work.
Key Features
- 1/8″ thick T42 — cuts and light grinding
- Depressed centre — angled cuts and notches
- Steel, stainless and structural
Perfect for: structural welders and fabricators doing combined cutting, weld notching and bevel work.
Specifications
| Identification | SKU | C6-5 |
|---|---|---|
| Shape | T42 Depressed Centre | |
| Dimensions | Diameter | 6″ (150 mm) |
| Thickness | 1/8″ (3.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 10,200 |
| Cuts | Steel, Iron, Structural steel, Rebar, Copper, Brass | |
| Cut depth | approx. 2 ⅛″ | |
| Compatibility | Fits | 6″ angle grinder (7/8″ spindle) |
| Package | Pack size | 10 pcs |
SKU C7-2
7″ Cutting Wheel
Heavy 7″ wheel for structural steel, pipe and thick plate.
A 7″ thin cutting wheel for 7″ angle grinders — deeper reach for structural steel, thick-wall pipe and heavy bar stock.
Key Features
- Thin kerf — fast cuts with low effort
- 7″ size — deeper-reach cuts
- Steel, stainless and structural
Perfect for: structural fabricators and ironworkers cutting steel pipe, heavy plate and structural sections.
Specifications
| Identification | SKU | C7-2 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 7″ (180 mm) |
| Thickness | 1/16″ (1.6 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 8,700 |
| Cuts | Steel, Stainless steel, Structural steel, Iron, Pipe, Heavy plate, Rebar | |
| Cut depth | approx. 2 ⅝″ | |
| Compatibility | Fits | 7″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C9-1
9″ Cutting Wheel
Heavy-duty 9″ wheel for thick steel sections and large pipe.
A 9″ cutting wheel for 9″ angle grinders — heavy-duty cutting on structural steel, pipe and large fabrication work.
Key Features
- 9″ size — deep-reach cuts on big stock
- Reinforced for heavy-duty grinder use
- Steel, stainless and structural
Perfect for: heavy fabricators and structural crews cutting large pipe, bar and structural sections.
Specifications
| Identification | SKU | C9-1 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 9″ (230 mm) |
| Thickness | 5/64″ (2.0 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 6,800 |
| Cuts | Steel, Stainless steel, Structural steel, Pipe, Bar, Heavy plate, Rebar | |
| Cut depth | approx. 3 ½″ | |
| Compatibility | Fits | 9″ large angle grinder (7/8″ spindle) |
| Package | Pack size | 10 pcs |
SKU C10-1
10″ Cutting Wheel
Production 10″ wheel for chop saws and stationary cut-off machines.
A 10″ cutting wheel for chop saws — clean square cuts on bar stock, angle iron, rebar and structural shapes.
Key Features
- 10″ chop-saw size — square cuts
- Reinforced for high-torque saws
- Steel and structural shapes
Perfect for: production fabrication shops running chop saws and stationary cut-off saws on steel.
Specifications
| Identification | SKU | C10-1 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 10″ (250 mm) |
| Thickness | 3/32″ (2.5 mm) | |
| Arbor | 5/8″ (16 mm) | |
| Performance | Max RPM | 6,100 |
| Cuts | Steel, Stainless steel, Structural steel, Pipe, Bar, Profile, Rebar | |
| Cut depth | approx. 3 ⅞″ | |
| Compatibility | Fits | Chop saw, stationary cut-off saw (5/8″ arbor) |
| Package | Pack size | 10 pcs |
SKU C12-1
12″ Cutting Wheel (20 mm Arbor)
High-speed steel cutting on 12″ chop saws with 20 mm arbor.
A 12″ chop-saw wheel with 20 mm arbor — production cutting on rebar, angle, channel and structural steel.
Key Features
- 20 mm arbor — fits metric chop saws
- Deep cut capacity — handles structural shapes
- Long-life Black bond — low cost per cut
Perfect for: fabrication shops running 12″ chop saws on structural steel, pipe, rebar and profiles.
Specifications
| Identification | SKU | C12-1 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 12″ (300 mm) |
| Thickness | 1/8″ (3.2 mm) | |
| Arbor | 20 mm | |
| Performance | Max RPM | 5,100 |
| Cuts | Steel, Stainless steel, Structural steel, Iron, Pipe, Rebar, Profile | |
| Cut depth | approx. 4 ¾″ | |
| Compatibility | Fits | 12″ chop saw, stationary cut-off saw (20 mm arbor) |
| Package | Pack size | 10 pcs |
SKU C12-2
12″ Cutting Wheel (1″ Arbor)
High-volume 12″ steel cutting on industrial cut-off machines with 1″ arbor.
A 12″ chop-saw wheel with 1″ arbor — production cutting on rebar, angle, channel and structural steel.
Key Features
- 1″ arbor — fits North-American chop saws
- Deep cut capacity — structural shapes
- Long-life Black bond — low cost per cut
Perfect for: industrial fabrication shops running 1″-arbor cut-off saws on structural steel and pipe.
Specifications
| Identification | SKU | C12-2 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 12″ (300 mm) |
| Thickness | 1/8″ (3.2 mm) | |
| Arbor | 1″ (25 mm) | |
| Performance | Max RPM | 5,100 |
| Cuts | Steel, Stainless steel, Structural steel, Iron, Pipe, Rebar, Profile | |
| Cut depth | approx. 4 ⅝″ | |
| Compatibility | Fits | 12″ chop saw, stationary cut-off saw (1″ arbor) |
| Package | Pack size | 5 pcs |
SKU C14-2
14″ Cutting Wheel (20 mm Arbor)
Heavy 14″ wheel for thick-section steel and pipe on 20 mm chop saws.
A 14″ chop-saw wheel with 20 mm arbor — fabrication-shop cutting on heavy bar, pipe and structural steel.
Key Features
- 20 mm arbor — fits metric chop saws
- 14″ size — heavy structural cuts
- Reinforced for high-torque saws
Perfect for: heavy production fabricators cutting large pipe, thick plate and structural profiles.
Specifications
| Identification | SKU | C14-2 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 14″ (355 mm) |
| Thickness | 1/8″ (3.2 mm) | |
| Arbor | 3/4″ (20 mm) | |
| Performance | Max RPM | 4,400 |
| Cuts | Steel, Stainless steel, Structural steel, Iron, Pipe, Large profile, Rebar | |
| Cut depth | approx. 5 ⅝″ | |
| Compatibility | Fits | 14″ chop saw, stationary cut-off saw (20 mm / 3/4″ arbor) |
| Package | Pack size | 5 pcs / 10 pcs |
SKU C14-3
14″ Cutting Wheel (1″ Arbor)
Production-scale 14″ wheel for industrial 1″-arbor cut-off saws.
A 14″ chop-saw wheel with 1″ arbor — fabrication-shop cutting on heavy bar, pipe and structural steel.
Key Features
- 1″ arbor — fits North-American chop saws
- 14″ size — heavy structural cuts
- Reinforced for high-torque saws
Perfect for: production fabricators running 1″-arbor cut-off saws on structural steel and pipe.
Specifications
| Identification | SKU | C14-3 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 14″ (355 mm) |
| Thickness | 1/8″ (3.2 mm) | |
| Arbor | 1″ (25 mm) | |
| Performance | Max RPM | 4,400 |
| Cuts | Steel, Stainless steel, Structural steel, Iron, Pipe, Large profile, Rebar | |
| Cut depth | approx. 5 ½″ | |
| Compatibility | Fits | 14″ chop saw, stationary cut-off saw (1″ arbor) |
| Package | Pack size | 10 pcs |
SKU C16-2
16″ Cutting Wheel (1″ Arbor)
Industrial 16″ wheel for thick-section steel and gas-powered cut-off saws.
A 16″ chop-saw wheel with 1″ arbor — the largest production cutter in the range for big structural and pipe work.
Key Features
- 1″ arbor — fits big stationary chop saws
- 16″ size — maximum depth of cut
- Reinforced for heavy-duty saws
Perfect for: ironworkers and heavy fabricators cutting beam, thick pipe and rebar on the jobsite or in the shop.
Specifications
| Identification | SKU | C16-2 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 16″ (405 mm) |
| Thickness | 1/8″ (3.2 mm) | |
| Arbor | 1″ (25 mm) | |
| Performance | Max RPM | 3,800 |
| Cuts | Steel, Stainless steel, Structural steel, Iron, Beam, Pipe, Rebar | |
| Cut depth | approx. 6 ⅜″ | |
| Compatibility | Fits | 16″ industrial cut-off saw, gas-powered cut-off saw (1″ arbor) |
| Package | Pack size | 5 pcs |
Add to Cart →Request a Bulk Quote
Fast Cut Series
Premium quality with extra-fine abrasive grains for a smooth, clean and fast cut, plus long service life. Includes T41 flat and T42 depressed-centre options for 4½″–7″ angle grinders.
SKU C45-FC1
4½″ Cutting Wheel — Fast Cut
Fast, smooth, burr-free 4½″ cuts with long service life.
A 4½″ Green Fast-Cut wheel — extra-aggressive grit for the fastest cut on stainless, steel and heat-sensitive metals.
Key Features
- Green Fast-Cut bond — fastest cut, cool running
- Thin kerf — minimal material loss
- Stainless and exotic-metal friendly
Perfect for: precision fabricators doing weld prep and clean cuts on steel, stainless and high-alloy steel.
Specifications
| Identification | SKU | C45-FC1 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 4½″ (115 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 13,300 |
| Cuts | Steel, Stainless steel, High-alloy steel, INOX | |
| Cut depth | approx. 1 ½″ | |
| Compatibility | Fits | 4½″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C45-FC2
4½″ Cutting Wheel — Fast Cut (Ultra-Thin 1.0 mm)
Ultra-thin 1.0 mm 4½″ wheel — fastest cut with minimum kerf loss.
A 4½″ ultra-thin (1.0 mm) Green Fast-Cut wheel — the lowest-effort, lowest-burr cut on stainless sheet and tubing.
Key Features
- 1.0 mm ultra-thin — least-effort cuts
- Green Fast-Cut bond — cool, fast
- Built for stainless sheet and tube
Perfect for: precision stainless and INOX fabricators where kerf width and finish quality matter most.
Specifications
| Identification | SKU | C45-FC2 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 4½″ (115 mm) |
| Thickness | 1/24″ (1.0 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 13,300 |
| Cuts | Stainless steel, INOX, Steel, High-alloy steel | |
| Cut depth | approx. 1 ½″ | |
| Compatibility | Fits | 4½″ angle grinder (7/8″ spindle) |
| Package | Pack size | 30 pcs |
SKU C45-FC3
4½″ Cutting Wheel — Fast Cut Depressed Centre
Premium fast-cut 4½″ depressed-centre wheel for angled and flush cuts.
A 4½″ depressed-centre (T42) Green Fast-Cut wheel — fast cutting plus light grinding for angled cuts and weld prep.
Key Features
- T42 depressed centre — cut and light grind
- Green Fast-Cut bond — fast, cool
- Stainless and steel capable
Perfect for: welders and fabricators doing offset/angled cuts, weld notching and flush cutting on a 4½″ grinder.
Specifications
| Identification | SKU | C45-FC3 |
|---|---|---|
| Shape | T42 Depressed Centre | |
| Dimensions | Diameter | 4½″ (115 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 13,300 |
| Cuts | Steel, Stainless steel, High-alloy steel | |
| Cut depth | approx. 1 ½″ | |
| Compatibility | Fits | 4½″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C5-FC1
5″ Cutting Wheel — Fast Cut
Fast, smooth, burr-free 5″ cuts with long service life.
A 5″ Green Fast-Cut wheel — extra-aggressive grit for the fastest cuts on bar, pipe and stainless tubing.
Key Features
- Green Fast-Cut bond — fastest cut
- Thin kerf — low material loss
- Stainless and exotic-metal friendly
Perfect for: precision fabricators doing weld prep and clean cuts on steel, stainless and high-alloy steel.
Specifications
| Identification | SKU | C5-FC1 |
|---|---|---|
| Shape | T41 Flat | |
| Dimensions | Diameter | 5″ (125 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 12,200 |
| Cuts | Steel, Stainless steel, High-alloy steel | |
| Cut depth | approx. 1 ¾″ | |
| Compatibility | Fits | 5″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C5-FC2
5″ Cutting Wheel — Fast Cut Depressed Centre
Premium fast-cut 5″ depressed-centre wheel for angled and flush cuts.
A 5″ depressed-centre (T42) Green Fast-Cut wheel — fast cutting and light grinding for angled cuts and weld prep.
Key Features
- T42 depressed centre — cut and grind
- Green Fast-Cut bond — fast, cool
- Stainless and steel capable
Perfect for: welders and fabricators doing offset/angled cuts, weld notching and flush cutting on a 5″ grinder.
Specifications
| Identification | SKU | C5-FC2 |
|---|---|---|
| Shape | T42 Depressed Centre | |
| Dimensions | Diameter | 5″ (125 mm) |
| Thickness | 0.045″ (1.2 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 12,200 |
| Cuts | Steel, Stainless steel, High-alloy steel | |
| Cut depth | approx. 1 ¾″ | |
| Compatibility | Fits | 5″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C6-FC1
6″ Cutting Wheel — Fast Cut Depressed Centre
Premium fast-cut 6″ depressed-centre wheel for structural offset cuts.
A 6″ depressed-centre (T42) Green Fast-Cut wheel — extra reach for angled cuts and weld prep on bigger work.
Key Features
- T42 depressed centre — cut and grind
- 6″ reach — deeper angled cuts
- Green Fast-Cut bond — fast, cool
Perfect for: structural welders and fabricators doing offset cuts and weld notching on heavy sections.
Specifications
| Identification | SKU | C6-FC1 |
|---|---|---|
| Shape | T42 Depressed Centre | |
| Dimensions | Diameter | 6″ (150 mm) |
| Thickness | 1/16″ (1.6 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 10,200 |
| Cuts | Steel, Stainless steel, Structural steel | |
| Cut depth | approx. 2 ⅛″ | |
| Compatibility | Fits | 6″ angle grinder (7/8″ spindle) |
| Package | Pack size | 25 pcs |
SKU C7-FC1
7″ Cutting Wheel — Fast Cut Depressed Centre
Premium fast-cut 7″ depressed-centre wheel for heavy structural offset cuts.
A 7″ depressed-centre (T42) Green Fast-Cut wheel — biggest reach in the range for fast cutting and weld prep on heavy work.
Key Features
- T42 depressed centre — cut and light grind
- 7″ size — maximum reach
- Green Fast-Cut bond — fast, cool
Perfect for: structural welders and ironworkers doing offset cuts and weld notching on heavy sections.
Specifications
| Identification | SKU | C7-FC1 |
|---|---|---|
| Shape | T42 Depressed Centre | |
| Dimensions | Diameter | 7″ (180 mm) |
| Thickness | 1/16″ (1.6 mm) | |
| Arbor | 7/8″ (22 mm) | |
| Performance | Max RPM | 8,700 |
| Cuts | Steel, Stainless steel, Structural steel | |
| Cut depth | approx. 2 ⅝″ | |
| Compatibility | Fits | 7″ angle grinder (7/8″ spindle) |
| Package | Pack size | 10 pcs |