This collection gathers die grinder abrasives on a 1/4" shank, plus 2" quick change discs that mount on a 1/4" shank pad holder, for deburring, weld cleanup and rust and paint removal.
This collection gathers die grinder abrasives on a 1/4" shank, plus 2" quick change discs that mount on a 1/4" shank pad holder, for deburring, weld cleanup and rust and paint removal. Fabricators, mechanics and auto body shops run them in die grinders and drills. The range covers mounted flap wheels, strip discs, abrasive and wire brushes, and carbide burrs.
- Aluminum oxide mounted flap wheels on a 1/4" shank, from 3/4" x 3/4" up to 3" x 1", in packs of 5 to 25, with grits from 40 to 180 depending on size, plus an 18-piece assorted cone set
- Interleaf flap wheels (abrasive cloth with non-woven web) in 3" x 1" and 3" x 2", for blending and light polishing on stainless steel, aluminum, brass and copper
- 2" quick change discs: 36 grit ceramic sanding discs (25 per pack), strip and clean discs (12 per pack, black or assorted colours) and wool felt polishing discs (10 per pack with pad holder)
- Zirconia and ceramic blend sanding discs in 2" or 3" with a 1/4" shank pad holder, plus a pad holder and mandrel kit that also takes 3/8" or 1/4" arbor wheels
- 4" silicon carbide strip and clean discs on a 1/4" shaft, in 2 and 3 packs, for paint, rust, coating and adhesive removal
- Brushes: 4" nylon flap brushes in 80, 120 and 240 grit, 2" emery rubber bristle discs and a 3" knotted twisted steel wire brush for drills
- Tungsten carbide rotary burrs, 5 per set, single cut, in cylinder, ball, tree and oval profiles
Frequently asked questions
What wire brush fits a die grinder?
The steel wire brush in this collection, a 3" knotted twisted brush on a 1/4" shank, is listed for drills only. For die grinder work, use the 4" nylon flap brushes (80, 120 and 240 grit) or the 2" emery rubber bristle discs, both listed for die grinders with a 1/4" shank. Never exceed the maximum RPM marked on any brush.
Which die grinder discs fit a 1/4" shank holder?
The 2" quick change discs in this collection, including the 36 grit ceramic Type R sanding discs, strip and clean discs and wool felt polishing discs, run on a 2" quick change pad holder with a 1/4" shank. The wool felt pack includes a holder, and the zirconia and ceramic blend discs come with their own 1/4" shank holder in 2" or 3".
What is a good deburring wheel for a die grinder?
Mounted flap wheels are the usual choice, and the aluminum oxide wheels here are listed for deburring, edge blending and chamfering, from 3/4" x 3/4" up to 3" x 1". Pick the smaller sizes for tighter areas. Interleaf wheels are listed for blending, finishing and light polishing on stainless steel and aluminum, and the carbide burrs for deburring, weld cleanup and shaping on steel, aluminum and copper.
How fast can I run a die grinder disc?
Never run it faster than the maximum RPM marked on the disc, wheel or brush. Ratings differ across this range: the 4" strip and clean discs are rated to 4,500 RPM and the 2" quick change strip discs to 13,000 RPM.
Find more shank-mounted wheels in our flap wheels with shank collection and more quick change discs, and read the die grinder abrasive FAQ and our wire brush spec guide.
Shipping, pickup and returns
- Ships from Whitby, Ontario to Canada and the United States. In-stock orders are dispatched within 1–2 business days.
- Free shipping on orders of $100 CAD or more in Canada and US$100 or more to the US. Otherwise a $20 CAD flat rate in Canada, a $27.50 CAD flat rate to the US, or carrier rates at checkout.
- Local pickup at Unit 2, 1450 Victoria Street East, Whitby, Ontario. Orders are usually ready in about 1 hour during business hours.
- Returns within 14 days of receipt for unused items in original packaging. Refund policy
- Buying in volume? Request a wholesale quote. We reply within 1–2 business days.