News

Machinist checking the surface finish of a ground steel part against a drawing specification

Ra vs Rz vs RMS: How to Read a Surface Finish Spec (and Convert Between Them)

grindingWhitby Abrasives
Machinist checking the surface finish of a ground steel part against a drawing specification

Ra vs Rz vs RMS: How to Read a Surface Finish Spec (and Convert Between Them)

grindingWhitby Abrasives
Belt grinder throwing sparks while grinding a steel workpiece in a metal fabrication shop

Belt Grinder Speed Chart: SFPM by Material and the RPM × 0.262 Rule

belt grinderWhitby Abrasives
Angle grinder with a thin cut-off wheel making a straight cut through steel bar, sparks trailing

Cut-Off Wheel Kickback & Pinching: Why Wheels Grab, Bind & Shatter — and How to Stop It

angle grinderWhitby Abrasives
Close-up of abrasive grain on a sanding disc surface showing grain spacing

Open Coat vs Closed Coat Abrasives: Grain Coverage, Stearate & When Each Wins

anti-loadingWhitby Abrasives
Tradesperson changing a cut-off disc on an angle grinder in a metal fabrication shop

Stuck Grinder Disc or Seized Flange Nut: How to Remove It & Stop It Recurring

angle grinderWhitby Abrasives
Knotted wire cup brush mounted on an angle grinder cleaning weld scale off steel

Wire Brush Spec Decode: Knotted vs Crimped, Wire Gauge, Max Safe Free Speed and How to Stop Wire Shedding

safetyWhitby Abrasives
Hand wet sanding a clearcoated car panel with fine waterproof sandpaper and water

Wet Sanding Grit Sequence: 800 to 3000, Wet-vs-Dry Rules & Which Paper Survives Water

auto bodyWhitby Abrasives
Angle grinder making a straight 90-degree cut in steel with a thin cutting disc, sparks trailing off the edge of the wheel

Can You Grind With a Cutting Disc? The Side-Load Rule & What ANSI B7.1 Actually Allows

angle grinderWhitby Abrasives
Die grinder with a small mounted point grinding inside a steel workpiece in a fabrication shop

Mounted Point Shape Codes Decoded: W, A & B Series, Shank Overhang & Why It Cuts Your Max RPM

die grinderWhitby Abrasives
Angle grinder spindle with flange nut and abrasive disc, showing the threaded arbor mount

Angle Grinder Thread & Arbor Size Chart: 5/8-11 vs M14, and Why 7/8" Means Exactly 22.23 mm

5/8-11Whitby Abrasives
Sanding belt mounted on a belt sander in a workshop

Sanding Belt Size Chart: Which Belt Fits Which Sander & How to Measure an Old Belt

belt sanderWhitby Abrasives

Canada's Manufacturing Boom Is Driving Abrasive Demand — What Fabricators Need to Know

abrasivesWhitby Abrasives
Sparks flying from a metal workpiece during grinding

Circular Abrasives Arrive: How Recycled Grain Is Reshaping Grinding Wheels and Sanding Belts in 2026

abrasivesWhitby Abrasives