Structural Steel Cutting
1 mm and 1.6 mm thin-kerf cut-off wheels for clean, fast cuts on angle iron, I-beams and plate — minimal burr, no kickback on the grinder.
Cutting WheelsIndustries Served: Metal Fabrication
Whitby Abrasives
Industries › Metal Fabrication
Industries Served
Abrasives for metal fabrication.
Professional-grade cutting wheels, grinding wheels, flap discs and deburring wheels for structural steel, sheet metal, pipe and weld removal — priced fairly and stocked in Whitby, Ontario.
4.83/5 · 1,895+ reviews
1–2 day shipping, Canada-wide
14-day satisfaction guarantee
Structural Steel
Sheet Metal
Pipe & Tube
Weld Removal
Edge Deburring
Surface Finishing
Key Applications
What we supply for metal fabrication.
From the first cut to the final finish — abrasives matched to every stage of the fab process.
Weld Bead Removal
Type 27 and Type 29 zirconia flap discs (36–80 grit) for fast, controllable weld removal without dish-grinding or undercutting the parent metal.
Flap DiscsEdge Deburring & Finishing
Rubber and nylon deburring wheels remove burrs on drilled, punched and laser-cut edges — consistent and repeatable without a tool change.
Deburring WheelsPipe & Tube Cutting
Ultra-thin 1 mm cut-off wheels and curved-face grinding discs for square, clean cuts and blend-out on round-section pipe and tube.
Cutting · Grinding
In the Shop
Abrasives at work.
Replace placeholder images with real Whitby Abrasives product photos and application shots.
Structural Cutting
Cutting structural steel — 1 mm kerf, clean cut
Weld bead removal — T29 flap disc, 36 grit zirconia
Edge deburring on laser-cut steel plate
Frame section grinding — depressed-centre wheel
Pipe cutting — ultra-thin 1 mm wheel, square cut
Surface finishing — 80 grit flap disc on sheet metal
Common Challenges
Problems we help you solve.
The most common abrasive frustrations in metal fabrication — and the right product for each one.
Wheel Life & Cost Per Part
Cheap aluminum oxide wears fast on steel and costs more per cut in the end. Zirconia and ceramic grain cuts faster and lasts longer — typically 3–5× more cuts per wheel at competitive per-unit pricing.
Heat Build-Up on Thin Metal
Excessive heat warps thin-wall tube and sheet metal. 1 mm thin-kerf wheels and correct RPM selection eliminate heat discolouration on stainless steel and thin mild steel sections.
Cross-Contamination on Stainless
Iron particles from standard abrasives embed in stainless steel and cause corrosion. Dedicated non-ferrous rated wheels are iron- and sulfur-free for clean, compliant stainless work.
Shop by Category
Products for metal fabrication.
Every abrasive your fab shop needs, stocked in Whitby and shipped across Canada in 1–2 days.
Ready to Order?
Abrasives your fab shop can count on.
In stock in Whitby, Ontario — shipped across Canada in 1–2 days. Local pickup available.
NEVER STOP GRINDING.