{"title":"Die Grinder Discs, Brushes and Flap Wheels","description":"\u003cp\u003eThis collection gathers die grinder abrasives on a 1\/4\" shank, plus 2\" quick change discs that mount on a 1\/4\" shank pad holder, for deburring, weld cleanup and rust and paint removal. Fabricators, mechanics and auto body shops run them in die grinders and drills. The range covers mounted flap wheels, strip discs, abrasive and wire brushes, and carbide burrs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAluminum oxide mounted flap wheels on a 1\/4\" shank, from 3\/4\" x 3\/4\" up to 3\" x 1\", in packs of 5 to 25, with grits from 40 to 180 depending on size, plus an 18-piece assorted cone set\u003c\/li\u003e\n\u003cli\u003eInterleaf flap wheels (abrasive cloth with non-woven web) in 3\" x 1\" and 3\" x 2\", for blending and light polishing on stainless steel, aluminum, brass and copper\u003c\/li\u003e\n\u003cli\u003e2\" quick change discs: 36 grit ceramic sanding discs (25 per pack), strip and clean discs (12 per pack, black or assorted colours) and wool felt polishing discs (10 per pack with pad holder)\u003c\/li\u003e\n\u003cli\u003eZirconia and ceramic blend sanding discs in 2\" or 3\" with a 1\/4\" shank pad holder, plus a pad holder and mandrel kit that also takes 3\/8\" or 1\/4\" arbor wheels\u003c\/li\u003e\n\u003cli\u003e4\" silicon carbide strip and clean discs on a 1\/4\" shaft, in 2 and 3 packs, for paint, rust, coating and adhesive removal\u003c\/li\u003e\n\u003cli\u003eBrushes: 4\" nylon flap brushes in 80, 120 and 240 grit, 2\" emery rubber bristle discs and a 3\" knotted twisted steel wire brush for drills\u003c\/li\u003e\n\u003cli\u003eTungsten carbide rotary burrs, 5 per set, single cut, in cylinder, ball, tree and oval profiles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat wire brush fits a die grinder?\u003c\/h3\u003e\u003cp\u003eThe steel wire brush in this collection, a 3\" knotted twisted brush on a 1\/4\" shank, is listed for drills only. For die grinder work, use the 4\" nylon flap brushes (80, 120 and 240 grit) or the 2\" emery rubber bristle discs, both listed for die grinders with a 1\/4\" shank. Never exceed the maximum RPM marked on any brush.\u003c\/p\u003e\u003ch3\u003eWhich die grinder discs fit a 1\/4\" shank holder?\u003c\/h3\u003e\u003cp\u003eThe 2\" quick change discs in this collection, including the 36 grit ceramic Type R sanding discs, strip and clean discs and wool felt polishing discs, run on a 2\" quick change pad holder with a 1\/4\" shank. The wool felt pack includes a holder, and the zirconia and ceramic blend discs come with their own 1\/4\" shank holder in 2\" or 3\".\u003c\/p\u003e\u003ch3\u003eWhat is a good deburring wheel for a die grinder?\u003c\/h3\u003e\u003cp\u003eMounted flap wheels are the usual choice, and the aluminum oxide wheels here are listed for deburring, edge blending and chamfering, from 3\/4\" x 3\/4\" up to 3\" x 1\". Pick the smaller sizes for tighter areas. Interleaf wheels are listed for blending, finishing and light polishing on stainless steel and aluminum, and the carbide burrs for deburring, weld cleanup and shaping on steel, aluminum and copper.\u003c\/p\u003e\u003ch3\u003eHow fast can I run a die grinder disc?\u003c\/h3\u003e\u003cp\u003eNever run it faster than the maximum RPM marked on the disc, wheel or brush. Ratings differ across this range: the 4\" strip and clean discs are rated to 4,500 RPM and the 2\" quick change strip discs to 13,000 RPM.\u003c\/p\u003e\u003cp\u003eFind more shank-mounted wheels in our \u003ca href=\"\/collections\/flap-wheels\"\u003eflap wheels with shank\u003c\/a\u003e collection and more \u003ca href=\"\/collections\/quick-change-discs\"\u003equick change discs\u003c\/a\u003e, and read the \u003ca href=\"\/blogs\/news\/die-grinder-abrasive-faq\"\u003edie grinder abrasive FAQ\u003c\/a\u003e and our \u003ca href=\"\/blogs\/news\/wire-brush-spec-decode\"\u003ewire brush spec guide\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"wa-grinder-3-inch-interleaf-shank-mounted-flap-wheels-with-1-4-shank-red-medium-3x2x1-4-sander-for-sanding-and-finishing-used-on-drill-die-grinder-remove-rust-and-polish-metal-wood-working","title":"3\" Interleaf Shank Mounted Flap Wheels with 1\/4\" Shank","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.2 out of 5 from 27 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHIGH QUALITY - 2-in-1 interleaf construction featuring alternating flaps of aluminum oxide abrasive cloth and non-woven conditioning material, precision-bonded to a mandrel for consistent, long-lasting performance. Unlike standard cloth-only flap wheels, the interleaf design progressively exposes fresh abrasive as the wheel wears, delivering a uniform finish throughout its entire service life without the uneven wear or hot spots typical of conventional wheels.\u003c\/li\u003e\n\u003cli\u003eSAFETY – Precision-balanced mandrel design eliminates vibration and runout during high-speed operation, reducing operator fatigue and maintaining control for safer, more accurate finishing work across extended use periods.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Ideal for weld blending, rust and scale removal, deburring, surface conditioning, light polishing, and fine finishing across a wide range of materials. The interleaf wheel adapts to curved, contoured, and irregular surfaces far more effectively than flat-disc abrasives. Effective on stainless steel, aluminum, brass, copper, wood, and composites.\u003c\/li\u003e\n\u003cli\u003eCOMPATIBILITY - 1\/4\" shank mounts directly into die grinders and hand drills without additional adapters, providing immediate, secure tool-to-wheel engagement for reliable high-speed operation.\u003c\/li\u003e\n\u003cli\u003eSIZE - Diameter 3\" (76mm), Thickness 2\" (50mm), Shaft 1\/4\" (6.35mm). Sold individually.\u003c\/li\u003e\n\u003cli\u003eThe non-woven interleaf layers actively dissipate heat during grinding, preventing discoloration, burn marks, and surface warping — particularly critical on stainless steel and aluminum where heat damage can compromise the finish and material integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do mounted flap wheels fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept the shank size listed (commonly 1\/4\").\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Deburring, blending, and finishing in slots, bores, and tight areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Metal, stainless steel, wood, and many non-metallic materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I pick?\u003c\/strong\u003e\u003cbr\u003eA: Coarser grits remove more material; finer grits leave a smoother finish.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"Default Title","offer_id":47870702747869,"sku":"3-2-1122-IFW-RED-1","price":7.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/b0876785.jpg?v=1777666792"},{"product_id":"3pcs-4-strip-clean-discs-with-1-4-shaft-black-4-x1-4-max-rpm-4-500-easy-strip-disc-surface-treatment-rust-paint-glue-removal-descaling-medium","title":"4\" Strip \u0026 Clean Discs with 1\/4\" Shank for Drills \u0026 Die Grinders, 3 Pack","description":"\u003cul\u003e\n\u003cli\u003eMULTIPURPOSE - Excellent for removing paint, varnish, welding point, rust, sealant, glue, oil and other surface contaminants without damaging the original surface.\u003c\/li\u003e\n\u003cli\u003eSURFACE TREATMENT - Ideal for surface treatments on metal, wood, plastic, automobile, and stone.\u003c\/li\u003e\n\u003cli\u003eRESISTANCE - High wear-resistant silicon carbide; the abrasive grains do not fall, accumulate, or adhere during high-speed grinding.\u003c\/li\u003e\n\u003cli\u003eSIZE - 4\" x 1\/4\" (100x16mm), Black, MAX 4,500 RPM.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 3 pcs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What do strip \u0026amp; clean discs remove?\u003c\/strong\u003e\u003cbr\u003eA: Paint, rust, coatings, weld spatter, adhesive, and sealant — without gouging the base material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What surfaces are safe?\u003c\/strong\u003e\u003cbr\u003eA: Metal, wood, plastic, and auto body panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Why use these instead of a wire wheel?\u003c\/strong\u003e\u003cbr\u003eA: They cut cooler, make less noise and dust, and won't throw wires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do they fit?\u003c\/strong\u003e\u003cbr\u003eA: Drills that accept a 1\/4\" shaft. The tool's speed must not exceed the disc's maximum of 4,500 RPM. Most die grinders run far faster than that, so use a die grinder only if it has speed control set at or below 4,500 RPM.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"3 PC","offer_id":47870705959133,"sku":"67-0Q5Y-PHQY","price":23.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/6bcd1d33.jpg?v=1777666713"},{"product_id":"5pcs-tungsten-carbide-rotary-burrs-set-with-1-4shank-carving-bit-set-for-die-grinder-diy-metal-carving-wood-working-engraving-polishing-drilling","title":"Tungsten Carbide Rotary Burrs with 1\/4\" Shank for Die Grinders","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.6 out of 5 from 5 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmooth Single-Cut Performance - The single-cut spiral pattern delivers controlled, steady cutting for smoother operation than double-cut burrs, with fewer burrs and a cleaner surface on steel, copper, and hardwood.\u003c\/li\u003e\n\u003cli\u003e1\/4\" Shank for Universal Fit - Compatible with most die grinders, electric drills, and rotary tools; provides a secure hold with reduced vibration on metal, wood, aluminum, and fiberglass.\u003c\/li\u003e\n\u003cli\u003eDurable Tungsten Carbide - Outstanding hardness and thermal resistance; lasts significantly longer than steel alternatives for fast, reliable cutting and grinding.\u003c\/li\u003e\n\u003cli\u003e5-Piece Multi-Shape Kit - Includes commonly used profiles such as cylinder, ball, tree, and oval for shaping, deburring, contouring, and hollowing.\u003c\/li\u003e\n\u003cli\u003eProfessional Accuracy - Excellent for metalwork, woodworking, weld cleanup, automotive detailing, and detailed crafting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What are carbide burrs used for?\u003c\/strong\u003e\u003cbr\u003eA: Shaping, deburring, contouring, weld cleanup, and material removal on metal, wood, and plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do they fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders, drills, and rotary tools that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Why tungsten carbide?\u003c\/strong\u003e\u003cbr\u003eA: It stays sharp far longer than steel and resists heat for fast, reliable cutting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I work?\u003c\/strong\u003e\u003cbr\u003eA: Steel, stainless steel, aluminum, copper, wood, and fiberglass.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"5 PC","offer_id":47870706286813,"sku":"A-032","price":39.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/72583387.jpg?v=1777666752"},{"product_id":"quick-change-disc-kit","title":"2\" \u0026 3\" Quick Change Disc Pad Holder \u0026 Mandrel Kit with 1\/4\" Shank","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.7 out of 5 from 14 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePackage: 2\" Disc Pad Holder (x1) + Mounting Mandrel Adaptor (x1)\u003c\/li\u003e\n\u003cli\u003e2\" Disc Pad Holder - A quick-change, heavy-duty rubber pad with a 1\/4\" shank, durable rubber pad and aluminum core, and a nickel-plated removable steel handle.\u003c\/li\u003e\n\u003cli\u003eCompatible with power drills, die grinders, air grinders, angle grinders, and most other power tools.\u003c\/li\u003e\n\u003cli\u003eMounting Mandrel Adaptor - Holds small cutting wheels with 3\/8\" or 1\/4\" arbor holes; threaded neck suits Type 1 cut-off wheels from 0.035\" to 1\/4\" thick. 1\/4\" shank fits most grinders, drills, and rotary tools.\u003c\/li\u003e\n\u003cli\u003eChuck-style arbor design supports grinding, sanding, cleaning, and polishing wheels, plus small saw blades.\u003c\/li\u003e\n\u003cli\u003eVersatile for grinding, polishing, surface preparation, paint stripping, and sanding primers; also works as a polishing pad holder.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What is this kit for?\u003c\/strong\u003e\u003cbr\u003eA: It adapts die grinders and drills to hold quick-change discs, small cutting wheels, and polishing pads for surface prep, stripping, and polishing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What tools does it fit?\u003c\/strong\u003e\u003cbr\u003eA: Power drills, die grinders, air grinders, and rotary tools that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What discs and wheels work with it?\u003c\/strong\u003e\u003cbr\u003eA: Roll-on quick-change discs, plus small cutting\/grinding\/polishing wheels with 3\/8\" or 1\/4\" arbor holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Do you ship within Canada?\u003c\/strong\u003e\u003cbr\u003eA: Yes — Whitby Abrasives ships across Canada.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"2\" Pad Holder + Mandrel","offer_id":47870706417885,"sku":"A-033","price":11.99,"currency_code":"CAD","in_stock":true},{"title":"2\" Pad Holder + 3\" Pad Holder + Mandrel","offer_id":47870706450653,"sku":"A-034","price":14.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/e6f39824.jpg?v=1777666752"},{"product_id":"12pack-2-mini-quick-change-strip-clean-discs-black-easy-strip-disc-for-die-grinder-surface-treatment-rust-paint-glue-removal-rpm-13-000-descaling-medium","title":"2\" Mini Quick Change Strip \u0026 Clean Discs, Black Easy Strip Disc for Die Grinder","description":"\u003cul\u003e\n\u003cli\u003eMULTIPURPOSE - Excellent for removing paint, varnish, welding point, rust, sealant, oil and other surface contaminants without damaging the original surface.\u003c\/li\u003e\n\u003cli\u003eDURABLE - Premium black Silicon Carbide material ensures longer wheel life and higher efficiency. Greatly minimizes sound and dust when applying.\u003c\/li\u003e\n\u003cli\u003eSURFACE TREATMENT - Ideal for various surface treatments on metal, wood, plastic, automobile, and stone.\u003c\/li\u003e\n\u003cli\u003eRESISTANCE - High wear-resistant; the abrasive grains do not fall, accumulate, or adhere during high-speed grinding. Easy to change. Safe to use.\u003c\/li\u003e\n\u003cli\u003eCOLOUR GUIDE - Black (general purpose): rust, paint, weld spatter on metal, wood, plastic. Purple (heavy-duty): heavy rust, thick coatings. Blue (gentle): aluminum, plastic, soft metals.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 12 pcs.\u003c\/li\u003e\n\u003cli\u003eSIZE - 2\" (50mm), RPM 13,000.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What do strip \u0026amp; clean discs remove?\u003c\/strong\u003e\u003cbr\u003eA: Paint, rust, coatings, weld spatter, adhesive, and sealant — without gouging the base material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What surfaces are safe?\u003c\/strong\u003e\u003cbr\u003eA: Metal, wood, plastic, and auto body panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Why use these instead of a wire wheel?\u003c\/strong\u003e\u003cbr\u003eA: They cut cooler, make less noise and dust, and won't throw wires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do they fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders that accept a 2\" quick-change disc. The tool's speed must not exceed the maximum RPM printed on the disc label. Many die grinders run faster than that, so use a die grinder only if it has speed control set at or below the disc's maximum RPM.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"12 PC","offer_id":47870706483421,"sku":"A3-AA8C-71RY","price":7.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/ac39acb2.jpg?v=1777666726"},{"product_id":"purple-zirconia-sanding-disc-with-1-4-shank-pad-holder","title":"Purple Zirconia Sanding Disc with 1\/4\" Shank Pad Holder","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.2 out of 5 from 7 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eENHANCED ZIRCONIA - Improved zirconia and ceramic blend grain offers greater strength and durability than aluminum oxide for demanding, heavy-duty work.\u003c\/li\u003e\n\u003cli\u003eDURABLE ABRASIVE - Strong, long-lasting grain delivers high efficiency in surface preparation, polishing, and grinding.\u003c\/li\u003e\n\u003cli\u003eAPPLICATIONS - Versatile on carbon steel, stainless steel, alloys, iron, wood, and non-ferrous metals. The open web runs cooler to minimize heat warping and discoloration.\u003c\/li\u003e\n\u003cli\u003eINCLUDES - Quick-change sanding discs plus a pad holder with a 1\/4\" shank.\u003c\/li\u003e\n\u003cli\u003eOPTIONS - 25-pack 3\" (36 grit) or 50-pack 2\" (mixed grits).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What do these fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills using the included 1\/4\" shank quick-change pad holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I work?\u003c\/strong\u003e\u003cbr\u003eA: Carbon steel, stainless steel, alloys, iron, wood, and non-ferrous metals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What's included?\u003c\/strong\u003e\u003cbr\u003eA: A set of quick-change zirconia sanding discs and a 1\/4\" shank pad holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I choose?\u003c\/strong\u003e\u003cbr\u003eA: Coarse grits remove fast; finer grits refine the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How do these zirconia drill sanding discs compare with aluminum oxide?\u003c\/strong\u003e\u003cbr\u003eA: The improved zirconia and ceramic blend grain offers greater strength and durability than aluminum oxide, so it suits demanding, heavy-duty surface prep, polishing, and grinding. The open web runs cooler to minimize heat warping and discoloration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What sizes does this sanding disc for a drill come in?\u003c\/strong\u003e\u003cbr\u003eA: Two options: a 25-pack of 3\" (76 mm) discs in 36 grit, or a 50-pack of 2\" (51 mm) discs in mixed grits. Both include a pad holder on a 1\/4\" shank. See all \u003ca href=\"\/collections\/die-grinder-abrasives\"\u003e1\/4\" shank abrasives\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"25 PACK - 3\" Grit 36","offer_id":47964403859677,"sku":"IZC0003RL036","price":19.99,"currency_code":"CAD","in_stock":true},{"title":"50 PACK - 2\" Mixed Grits","offer_id":47964403892445,"sku":"SA2-8","price":34.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/b175b77e.jpg?v=1777666805"},{"product_id":"wa-10pack-3-4-x3-4-x1-4-high-performance-mounted-flap-wheels-with-1-4-shank","title":"3\/4\" x 3\/4\" x 1\/4\" Mounted Flap Wheels with 1\/4\" Shank","description":"\u003cul\u003e\n\u003cli\u003eHIGH QUALITY - The unique product design maintains a perfect mandrel balance reducing operator fatigue and delivering a smooth, vibration-free finish performance.\u003c\/li\u003e\n\u003cli\u003eMATERIAL - Our shank mounted flap wheels are made using high-performance abrasive cloth from Germany which greatly improves grinding efficiency and lifespan.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Ideal for surface finishing and preparation, decorative finishes, and edge blending and chamfering. Widely used on wood, steel and non-metal materials.\u003c\/li\u003e\n\u003cli\u003eSIZE - 3\/4-Inch diameter, 3\/4-Inch length, with a 1\/4-Inch shaft\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 10 PACK\u003c\/li\u003e\n\u003cli\u003ePACKAGE DIMENSIONS - 8.6 × 8.1 × 8 cm, 170 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do mounted flap wheels fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept the shank size listed (commonly 1\/4\").\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Deburring, blending, and finishing in slots, bores, and tight areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Metal, stainless steel, wood, and many non-metallic materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I pick?\u003c\/strong\u003e\u003cbr\u003eA: Coarser grits remove more material; finer grits leave a smoother finish.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"120 Grit \/ 10 PC","offer_id":47870709956829,"sku":"IZ-3VBB-9964","price":12.99,"currency_code":"CAD","in_stock":false},{"title":"80 Grit \/ 10 PC","offer_id":47870709989597,"sku":"X7-4F25-UEEC","price":12.99,"currency_code":"CAD","in_stock":true},{"title":"60 Grit \/ 10 PC","offer_id":47870710022365,"sku":"WF-JWKN-VTDW","price":12.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/5c22dfad.jpg?v=1777666756"},{"product_id":"wa-grinder-10pcs-1-1-2-aluminum-oxide-shank-mounted-flap-wheels-1-1-2x1-x1-4-inch-40-industrial-grade-sander-with-1-4-shank-for-drill-die-grinder-rust-removal-and-weld-burr-40-grit-10-pack","title":"1-1\/2\" Aluminum Oxide Mounted Flap Wheels with 1\/4\" Shank Grit 40","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.3 out of 5 from 13 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHIGH QUALITY - The unique design maintains a perfect mandrel balance to reduce operator fatigue and deliver a smooth, vibration-free performance.\u003c\/li\u003e\n\u003cli\u003eMATERIAL - Made with high-performance abrasive cloth from Germany for efficient grinding and a long lifespan.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Ideal for surface finishing, preparation, decorative finishes, edge blending, and chamfering.\u003c\/li\u003e\n\u003cli\u003eSIZE - 1 1\/2\" diameter, 1\" length, with a 1\/4\" shaft, 40 grit.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 10 PACK.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do mounted flap wheels fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Deburring, blending, and finishing in slots, bores, and tight areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Metal, stainless steel, wood, and many non-metallic materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit is this?\u003c\/strong\u003e\u003cbr\u003eA: 40 grit — a coarse grade for faster stock removal.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"10 PC","offer_id":47870710218973,"sku":"MAO15011440","price":15.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/06460188.jpg?v=1777666804"},{"product_id":"wa-18pack-high-performance-durable-mounted-flap-wheels-assorted-grit-6x60-6x80-6x120-aluminum-oxide-flap-wheels-cone-shape-sanding-wheel","title":"Aluminum Oxide Cone Mounted Flap Wheels with 1\/4\" Shank – Assorted Grits","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.2 out of 5 from 57 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHIGH QUALITY - The unique design maintains a perfect mandrel balance, reducing operator fatigue and delivering a smooth, vibration-free finish.\u003c\/li\u003e\n\u003cli\u003eMATERIAL - Made with high-performance abrasive cloth for efficient grinding and a long lifespan.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Ideal for surface finishing, preparation, decorative finishes, edge blending, and chamfering on wood, steel, and non-metal materials.\u003c\/li\u003e\n\u003cli\u003eCONE SHAPE - Tapered profile for contours and hard-to-reach areas.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 18 PACK, assorted grits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do mounted flap wheels fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept the shank size listed (commonly 1\/4\").\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Deburring, blending, and finishing on contours and in tight areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Metal, stainless steel, wood, and many non-metallic materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I pick?\u003c\/strong\u003e\u003cbr\u003eA: Coarser grits remove more material; finer grits leave a smoother finish.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"1\"x1\"x1\/4\" \/ 18 PC","offer_id":47964403499229,"sku":"MAO000101111","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"2\"x1\"x1\/4\" \/ 18 PC","offer_id":47964403531997,"sku":"MAO000201111","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"1 1\/2\"x1\"x1\/4\" \/ 18 PC","offer_id":47964403564765,"sku":"MAO001501111","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"3\/4\"x3\/4\"x1\/4\" \/ 18 PC","offer_id":47964403597533,"sku":"MAO003434111","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/baef2aa5.jpg?v=1777666826"},{"product_id":"wa-25pack-1x1x1-4-industrial-grade-high-performance-durable-aluminum-oxide-mounted-flap-wheels-mounted-with-1-4-shank","title":"1\" x 1\" x 1\/4\" Aluminum Oxide Mounted Flap Wheels with 1\/4\" Shank","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.6 out of 5 from 5 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHIGH QUALITY - The unique design maintains a perfect mandrel balance, reducing operator fatigue and delivering a smooth, vibration-free finish.\u003c\/li\u003e\n\u003cli\u003eMATERIAL - Made with high-performance abrasive cloth from Germany for efficient grinding and a long lifespan.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Ideal for surface finishing, preparation, decorative finishes, edge blending, and chamfering on wood, steel, and non-metal materials.\u003c\/li\u003e\n\u003cli\u003eSIZE - 1\" diameter, 1\" length, with a 1\/4\" shaft.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 25 PACK.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do mounted flap wheels fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Deburring, blending, and finishing in slots, bores, and tight areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Metal, stainless steel, wood, and many non-metallic materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I pick?\u003c\/strong\u003e\u003cbr\u003eA: Coarser grits remove more material; finer grits leave a smoother finish.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"40 Grit \/ 25 PC","offer_id":47964403040477,"sku":"MAO000100040","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"60 Grit \/ 25 PC","offer_id":47964403073245,"sku":"MAO000100060","price":24.99,"currency_code":"CAD","in_stock":false},{"title":"80 Grit \/ 25 PC","offer_id":47964403106013,"sku":"MAO000100080","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"120 Grit \/ 25 PC","offer_id":47964403138781,"sku":"MAO000100120","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"180 Grit \/ 25 PC","offer_id":47964403171549,"sku":"MAO000100180","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/f267fbac.jpg?v=1777666828"},{"product_id":"2pcs-4-strip-clean-discs-with-1-4-shaft-black-4-x1-4-max-rpm-4-500-double-layer-easy-strip-disc-surface-treatment-rust-paint-glue-removal-descaling-medium","title":"4\" Strip \u0026 Clean Discs with 1\/4\" Shank for Drills \u0026 Die Grinders, 2 Pack","description":"\u003cul\u003e\n\u003cli\u003eMULTIPURPOSE - Excellent for removing paint, varnish, welding point, rust, sealant, glue, oil and other surface contaminants without damaging the original surface.\u003c\/li\u003e\n\u003cli\u003eSURFACE TREATMENT - Ideal for various surface treatments on metal, wood, plastic, automobile, and stone.\u003c\/li\u003e\n\u003cli\u003eRESISTANCE - Highly wear-resistant silicon carbide. The double-layer thickness provides more durable and efficient working than ordinary discs.\u003c\/li\u003e\n\u003cli\u003eCOLOUR GUIDE - Black (general purpose), Purple (heavy-duty), Blue (gentle finish for aluminum, plastic, soft metals).\u003c\/li\u003e\n\u003cli\u003eSIZE - 4\" x 1\/4\" (100x16mm), Black, MAX 4,500 RPM.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 2 pcs.\u003c\/li\u003e\n\u003cli\u003eWARNING - Wear proper eye, face, body and respiratory protection. Comply with ANSI B7.1. Do not exceed max RPM marked on the wheel. Use proper guards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What do strip \u0026amp; clean discs remove?\u003c\/strong\u003e\u003cbr\u003eA: Paint, rust, coatings, weld spatter, adhesive, and sealant — without gouging the base material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What surfaces are safe?\u003c\/strong\u003e\u003cbr\u003eA: Metal, wood, plastic, and auto body panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Why use these instead of a wire wheel?\u003c\/strong\u003e\u003cbr\u003eA: They cut cooler, make less noise and dust, and won't throw wires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do they fit?\u003c\/strong\u003e\u003cbr\u003eA: Drills that accept a 1\/4\" shaft. The tool's speed must not exceed the disc's maximum of 4,500 RPM. Most die grinders run far faster than that, so use a die grinder only if it has speed control set at or below 4,500 RPM.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"2 PC","offer_id":47870711300317,"sku":"QV-800D-XM0K","price":7.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/ab6bef6e.jpg?v=1777666772"},{"product_id":"wa-25pack-2-ceramic-quick-change-sanding-discs-36-type-r-vsm-ceramic-grains-disc-for-die-grinder-type-r-male-2-inch-36-grit-pack-of-25","title":"2\" Ceramic Quick Change Sanding Discs, 36 Type R\/TR VSM Ceramic Grains Disc for Die Grinder","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.0 out of 5 from 11 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMATERIAL - Made with premium German VSM abrasive cloth. Ceramic grains keep super-sharp points that cut exceptionally fast with less pressure.\u003c\/li\u003e\n\u003cli\u003eSUPERIOR CUTTING POWER \u0026amp; LONGEVITY - Faster material removal and significantly longer life than aluminum oxide, ideal for heavy-duty grinding on hard metals like stainless steel.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Ideal for hard-to-grind and heat-sensitive materials. Compatible with drills, die grinders, and air grinders via a Type R twist-lock system.\u003c\/li\u003e\n\u003cli\u003eCOOL GRINDING - Runs cooler to reduce discoloration, oxidation, and heat stress cracks.\u003c\/li\u003e\n\u003cli\u003eSIZE - 2\" (50mm) Grit 36#.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 25 pcs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What do these sanding discs fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders, drills, and air grinders with a Type R quick-change holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I work?\u003c\/strong\u003e\u003cbr\u003eA: Steel, stainless steel, and other hard, heat-sensitive metals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Why ceramic grain?\u003c\/strong\u003e\u003cbr\u003eA: Ceramic self-sharpens for faster cutting and longer life than aluminum oxide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I choose?\u003c\/strong\u003e\u003cbr\u003eA: Coarse grits remove fast; finer grits refine the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What size is this ceramic quick change disc?\u003c\/strong\u003e\u003cbr\u003eA: Each disc is 2\" (50 mm) across in 36 grit, sold in packs of 25. The ceramic grain cuts fast with less pressure and runs cooler, reducing discoloration, oxidation and heat stress cracks on hard metals such as stainless steel. See all \u003ca href=\"\/collections\/die-grinder-abrasives\"\u003edie grinder abrasives\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"25 PC","offer_id":47870711398621,"sku":null,"price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/9226098b.jpg?v=1777666728"},{"product_id":"wa-grinder-3-knotted-twisted-steel-wire-brush-for-drill-1-4-shank-7-6cm-1-count-coarse-grit-ideal-for-rust-corrosion-paint-removal-and-deburring","title":"3\" Knotted Twisted Steel Wire Brush for Drill – 1\/4\" Shank, Rust \u0026 Paint Removal","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.8 out of 5 from 27 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGreat for removing rust, corrosion, paint, plus deburring and prepping surfaces. Works especially well on castings, structural steel, and sheet metal.\u003c\/li\u003e\n\u003cli\u003eThe twisted-wire design increases durability and pressure resistance. Made from hardened steel wire to minimize breakage and extend lifespan.\u003c\/li\u003e\n\u003cli\u003eComes with a 1\/4\" shank that fits most drills.\u003c\/li\u003e\n\u003cli\u003eIdeal for reaching tight spaces and narrow holes.\u003c\/li\u003e\n\u003cli\u003eAlways wear safety goggles or eye protection when using. Sold individually.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What is this brush used for?\u003c\/strong\u003e\u003cbr\u003eA: Removing rust, corrosion, paint, and weld slag, plus deburring and surface prep on metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool does it fit?\u003c\/strong\u003e\u003cbr\u003eA: Drills and drivers that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Why a knotted\/twisted brush?\u003c\/strong\u003e\u003cbr\u003eA: The twisted wire is more aggressive and durable for heavy rust and weld-slag removal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Do you ship within Canada?\u003c\/strong\u003e\u003cbr\u003eA: Yes — Whitby Abrasives ships across Canada.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What size is this wire brush for a drill?\u003c\/strong\u003e\u003cbr\u003eA: It is a 3\" (75 mm) knotted brush on a 1\/4\" (6 mm) shank, sold individually. The 1\/4\" shank fits most drills, and the brush is ideal for reaching tight spaces and narrow holes. See all \u003ca href=\"\/collections\/die-grinder-abrasives\"\u003e1\/4\" shank abrasives\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which metals can I clean with this wire wheel for a drill?\u003c\/strong\u003e\u003cbr\u003eA: It works especially well on castings, structural steel, and sheet metal. The knotted steel wire strips rust, corrosion, and paint from these surfaces and also handles deburring and surface prep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is this wire brush drill attachment made of?\u003c\/strong\u003e\u003cbr\u003eA: It uses hardened steel wire twisted into knots. The twisted-wire design increases durability and pressure resistance, and the hardened wire minimizes breakage to extend the brush's lifespan.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What safety gear do I need for a wire brush on a drill?\u003c\/strong\u003e\u003cbr\u003eA: Always wear safety goggles or eye protection while using it. Before you start, check the maximum RPM marked on the brush and never run your drill faster than that.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"Default Title","offer_id":47870711857373,"sku":"WIRE01","price":9.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/05b40c67.jpg?v=1777666841"},{"product_id":"wa-grinder-10pack-2-inch-wool-sanding-disc-wool-felt-quick-change-male-r-type-disc-surface-polishing-buffing-discs-with-1-4-shank-for-drill-die-grinder-rotary-tools","title":"2\" Wool Felt Quick Change Discs with 1\/4\" Shank for Polishing","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.8 out of 5 from 16 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUNLOCK YOUR POLISHIGN POTENTIAL: Elevate your polishing expertise with our 10 PACK - 2'' Wool Fabric Felt Quick Change Disc Set, delivering 10 premium compressed wool polishing buffing pads and a robust Quick Change disc pad holder.\u003c\/li\u003e\n\u003cli\u003eNATURAL COMPRESSED WOOL: Crafted from 100% natural compressed wool, these pads excel in superior buffing, versatility, and long-lasting durability. They are your key to achieving a professional finish.\u003c\/li\u003e\n\u003cli\u003eVERSATILE POLISHING APPLICATIONS: Ideal for a wide spectrum of polishing projects, this kit enhances a variety of surfaces, including stainless steel, metals, wood, chrome, synthetics, and more. Your go-to solution for top-tier polishing.\u003c\/li\u003e\n\u003cli\u003eCOMPLETE POLISHING SET: Your package boasts 10 PACK Wool Quick Change Disc Polishing Buffing Pads Wheels and 1 PACK 2\" Disc Pad Holder with a 1\/4\" Shank.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What are these polishing wheels for?\u003c\/strong\u003e\u003cbr\u003eA: Final buffing, blending, and brightening on metal, stainless steel, and more.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Do I need a compound?\u003c\/strong\u003e\u003cbr\u003eA: For a mirror finish, use with a polishing compound suited to your material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do they fit?\u003c\/strong\u003e\u003cbr\u003eA: Rotary tools, drills, and polishers matching the shank or mount listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What can I polish?\u003c\/strong\u003e\u003cbr\u003eA: Steel, stainless, chrome, aluminum, and many non-metals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How do I set up this polishing pad for a drill?\u003c\/strong\u003e\u003cbr\u003eA: Lock the included 2\" disc pad holder into your drill by its 1\/4\" shank, then fit a wool felt quick-change disc onto the holder. The set includes 10 discs and one holder, so you can change to a fresh pad quickly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What comes with these 2\" polishing pads?\u003c\/strong\u003e\u003cbr\u003eA: The set has 10 wool felt quick-change discs and one 2\" disc pad holder with a 1\/4\" (6 mm) shank. Each 2\" (50 mm) disc is made of 100% natural compressed wool for durable buffing and polishing. See all \u003ca href=\"\/collections\/wool-buffing-wheels\"\u003ewool felt buffing wheels\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"10 PC + 1 Holder","offer_id":47870711955677,"sku":"WWL0002RL000","price":11.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/ee095656.jpg?v=1777666820"},{"product_id":"5pack-3-inch-interleaf-shank-mounted-flap-wheels-with-1-4-shank-red-medium-3x1x1-4-sander-for-sanding-and-finishing-used-on-drill-die-grinder-remove-rust-and-polish-metal-wood-working-5pcs","title":"3\" x 1\" Interleaf Shank Mounted Flap Wheels with 1\/4\" Shank","description":"\u003cul\u003e\n\u003cli\u003e2-IN-1 ABRASIVE POWER - Alternating flaps of abrasive cloth and non-woven material for time-saving surface prep. The non-woven layers dissipate heat, preventing discoloration and burn marks on delicate materials.\u003c\/li\u003e\n\u003cli\u003eFITS MOST TOOLS - 1\/4\" shank mount attaches to die grinders and hand drills for fast, on-the-go finishing.\u003c\/li\u003e\n\u003cli\u003eSMOOTH, CONSISTENT FINISH - Produces a uniform satin or brushed finish on metals, plastics, and wood, even on curved or contoured surfaces.\u003c\/li\u003e\n\u003cli\u003eCOOL, BURN-FREE GRINDING - Non-woven layers reduce heat buildup and protect delicate surfaces.\u003c\/li\u003e\n\u003cli\u003eMULTI-MATERIAL - Effective on stainless steel, aluminum, brass, copper, wood, and composites. SIZE: 3\" diameter, 1\" thick, 1\/4\" shaft. 5 PCS.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do these fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Weld blending, rust removal, cleaning, finishing, and light polishing on metal, wood, and plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What makes interleaf wheels different?\u003c\/strong\u003e\u003cbr\u003eA: Alternating abrasive and non-woven flaps blend and finish while running cooler than cloth-only wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Stainless steel, aluminum, brass, copper, wood, and composites.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"5 PC","offer_id":47870712283357,"sku":"4S-Y7PB-OFXE","price":19.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/4242b1a5.jpg?v=1777666720"},{"product_id":"12pack-2-quick-change-assorted-mini-strip-clean-discs-for-die-grinder-paint-rust-removal-wheel-purplex4-blackx4-bluex4-rpm-13-000","title":"2\" Quick Change Assorted Mini Strip \u0026 Clean Discs, for Die Grinder","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.0 out of 5 from 56 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMULTIPURPOSE - Excellent for removing paint, varnish, welding point, rust, sealant, oil and other surface contaminants without damaging the original surface.\u003c\/li\u003e\n\u003cli\u003eSURFACE TREATMENT - Ideal for various surface treatments on metal, wood, plastic, automobile, and stone.\u003c\/li\u003e\n\u003cli\u003eRESISTANCE - Silicon carbide material is highly wear-resistant; the abrasive grains do not fall, accumulate, or adhere during high-speed grinding. Easy to change. Safe to use.\u003c\/li\u003e\n\u003cli\u003eCOLOUR GUIDE - Black: general rust, paint, and weld removal. Purple: heavy rust, thick paint, industrial-grade stripping. Blue: softer materials like aluminum and plastic for light cleaning without damage.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 12 pcs (Black x4, Red x4, Blue x4).\u003c\/li\u003e\n\u003cli\u003eSIZE - 2\" (50mm), RPM 13,000.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What do strip \u0026amp; clean discs remove?\u003c\/strong\u003e\u003cbr\u003eA: Paint, rust, coatings, weld spatter, adhesive, and sealant — without gouging the base material.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What surfaces are safe?\u003c\/strong\u003e\u003cbr\u003eA: Metal, wood, plastic, and auto body panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Why use these instead of a wire wheel?\u003c\/strong\u003e\u003cbr\u003eA: They cut cooler, make less noise and dust, and won't throw wires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do they fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders that accept a 2\" quick-change disc. The tool's speed must not exceed the maximum RPM printed on the disc label. Many die grinders run faster than that, so use a die grinder only if it has speed control set at or below the disc's maximum RPM.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"12 PC","offer_id":47870712381661,"sku":"IJ-XKUM-SFGR","price":9.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/0bf2f226.jpg?v=1777666748"},{"product_id":"wa-10pack-2-1-1-4-industrial-grade-high-performance-durable-aluminum-oxide-mounted-flap-wheels-with-1-4-shank","title":"2\" x 1\" x 1\/4\" Aluminum Oxide Mounted Flap Wheels with 1\/4\" Shank","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.5 out of 5 from 8 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHIGH QUALITY - Aluminum oxide abrasive cloth for efficient grinding and a long working life.\u003c\/li\u003e\n\u003cli\u003eMATERIAL - Mounted flap wheel with a balanced mandrel for smooth, vibration-free finishing.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - For surface finishing, edge blending, and chamfering on wood, steel, and non-metals.\u003c\/li\u003e\n\u003cli\u003eSIZE - 2\" x 1\" x 1\/4\" shank\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 10 PACK\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do mounted flap wheels fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept the shank size listed (commonly 1\/4\").\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Deburring, blending, and finishing in slots, bores, and tight areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Metal, stainless steel, wood, and many non-metallic materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I pick?\u003c\/strong\u003e\u003cbr\u003eA: Coarser grits remove more material; finer grits leave a smoother finish.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"40 Grit \/ 10 PC","offer_id":47964399796445,"sku":"2-1-14-0123-FW-40-10","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"120 Grit \/ 10 PC","offer_id":47964399829213,"sku":"2-1-14-1122-FW-120-10","price":21.99,"currency_code":"CAD","in_stock":true},{"title":"60 Grit \/ 10 PC","offer_id":47964399861981,"sku":"XD-SYC4-QQE0","price":21.99,"currency_code":"CAD","in_stock":true},{"title":"80 Grit \/ 10 PC","offer_id":47964399894749,"sku":"I9-FGDR-5MUH","price":24.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/b2c72b3c.jpg?v=1777666717"},{"product_id":"wa-1x1x1-4-industrial-grade-high-performance-durable-aluminum-oxide-mounted-flap-wheels-with-1-4-shank","title":"1\" x 1\" x 1\/4\" Aluminum Oxide Mounted Flap Wheels with 1\/4\" Shank for Die Grinder","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.2 out of 5 from 57 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHIGH QUALITY - The unique product design maintains a perfect mandrel balance reducing operator fatigue and delivering a smooth, vibration-free finish performance.\u003c\/li\u003e\n\u003cli\u003eMATERIAL - Our shank mounted flap wheels are made using high-performance abrasive cloth from Germany which greatly improves grinding efficiency and lifespan.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Ideal for surface finishing and preparation, decorative finishes, and edge blending and chamfering. Widely used on wood, steel and non-metal materials.\u003c\/li\u003e\n\u003cli\u003eSIZE - 1\" diameter, 1\" length, with a 1\/4\" shaft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do mounted flap wheels fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept the shank size listed (commonly 1\/4\").\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Deburring, blending, and finishing in slots, bores, and tight areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Metal, stainless steel, wood, and many non-metallic materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I pick?\u003c\/strong\u003e\u003cbr\u003eA: Coarser grits remove more material; finer grits leave a smoother finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What size is this 1\/4\" flap wheel?\u003c\/strong\u003e\u003cbr\u003eA: It is 1\" in diameter and 1\" long on a 1\/4\" shank, with aluminum oxide flaps of high-performance abrasive cloth. The small size reaches into tight spots for surface finishing, edge blending, chamfering and deburring. See all \u003ca href=\"\/collections\/die-grinder-abrasives\"\u003edie grinder abrasives\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Will this 1\/4\" flap wheel vibrate in a die grinder?\u003c\/strong\u003e\u003cbr\u003eA: The design keeps the mandrel in balance, so the wheel runs smoothly with a vibration-free finish and less operator fatigue. For safe use, check the maximum RPM marked on the wheel and never exceed it.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"Grit 60 (10 PACK)","offer_id":47964399403229,"sku":"1-1-14-1122-FW-60-10","price":9.99,"currency_code":"CAD","in_stock":false},{"title":"Grit 80 (10 PACK)","offer_id":47964399435997,"sku":"1-1-14-1122-FW-80-10","price":9.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/17a30f38.jpg?v=1777666788"},{"product_id":"wa-25pack-3-4x3-4x1-4-industrial-grade-high-performance-durable-aluminum-oxide-mounted-flap-wheels-with-1-4-shank","title":"3\/4\" x 3\/4\" x 1\/4\" Aluminum Oxide Mounted Flap Wheels with 1\/4\" Shank","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.4 out of 5 from 12 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHIGH QUALITY - The unique design maintains a perfect mandrel balance, reducing operator fatigue and delivering a smooth, vibration-free finish.\u003c\/li\u003e\n\u003cli\u003eMATERIAL - Made with high-performance abrasive cloth from Germany for efficient grinding and a long lifespan.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Ideal for surface finishing, preparation, decorative finishes, edge blending, and chamfering on wood, steel, and non-metal materials.\u003c\/li\u003e\n\u003cli\u003eSIZE - 3\/4\" diameter, 3\/4\" length, with a 1\/4\" shaft.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 25 PACK.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do mounted flap wheels fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Deburring, blending, and finishing in slots, bores, and tight areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Metal, stainless steel, wood, and many non-metallic materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I pick?\u003c\/strong\u003e\u003cbr\u003eA: Coarser grits remove more material; finer grits leave a smoother finish.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"Grit 60 (25 PACK)","offer_id":47964399108317,"sku":"9G-7218-0GWI","price":31.99,"currency_code":"CAD","in_stock":true},{"title":"Grit 120 (25 PACK)","offer_id":47964399141085,"sku":"9Q-9L5S-6PPA","price":31.99,"currency_code":"CAD","in_stock":false},{"title":"Grit 40 (25 PACK)","offer_id":47964399173853,"sku":"MAO003434040","price":31.99,"currency_code":"CAD","in_stock":true},{"title":"Grit 80 (25 PACK)","offer_id":47964399206621,"sku":"XP-O48L-2BCO","price":31.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/3b5e3a9b.jpg?v=1777666717"},{"product_id":"wa-5pcs-3x1x1-4-industrial-grade-high-performance-durable-aluminum-oxide-mounted-flap-wheelswith-1-4-shank","title":"3\" x 1\" x 1\/4\" Aluminum Oxide Mounted Flap Wheels with 1\/4\" Shank","description":"\u003cul\u003e\n\u003cli\u003eHIGH QUALITY - The unique design maintains a perfect mandrel balance, reducing operator fatigue and delivering a smooth, vibration-free finish.\u003c\/li\u003e\n\u003cli\u003eMATERIAL - Made with high-performance abrasive cloth from Germany for efficient grinding and a long lifespan.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Ideal for surface finishing, preparation, decorative finishes, edge blending, and chamfering.\u003c\/li\u003e\n\u003cli\u003eSIZE - 3\" diameter, 1\" length, with a 1\/4\" shaft. Available in 40, 60, and 80 grit.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 5 PCS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do mounted flap wheels fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Deburring, blending, and finishing in slots, bores, and tight areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Metal, stainless steel, wood, and many non-metallic materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I pick?\u003c\/strong\u003e\u003cbr\u003eA: Coarser grits remove more material; finer grits leave a smoother finish.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"40 Grit \/ 1 Pack (5pcs)","offer_id":47870716084445,"sku":"3-1-14-1122-FW-40-5","price":19.99,"currency_code":"CAD","in_stock":true},{"title":"60 Grit \/ 1 Pack (5pcs)","offer_id":47870716117213,"sku":"3-1-14-1122-FW-60-5","price":19.99,"currency_code":"CAD","in_stock":true},{"title":"80 Grit \/ 1 Pack (5pcs)","offer_id":47870716149981,"sku":"3-1-14-1122-FW-80-5","price":19.99,"currency_code":"CAD","in_stock":false},{"title":"40 Grit \/ 1 Case (20 packs)","offer_id":47952944824541,"sku":"3-1-14-1122-FW-40-5","price":74.99,"currency_code":"CAD","in_stock":true},{"title":"60 Grit \/ 1 Case (20 packs)","offer_id":47952944857309,"sku":"3-1-14-1122-FW-60-5","price":74.99,"currency_code":"CAD","in_stock":false},{"title":"80 Grit \/ 1 Case (20 packs)","offer_id":47952944890077,"sku":"3-1-14-1122-FW-80-5","price":74.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/6a70afec.jpg?v=1777666788"},{"product_id":"wa-5pack-1-1-2x1x1-4-industrial-grade-high-performance-durable-aluminum-oxide-mounted-flap-wheels-with-1-4-shank","title":"1-1\/2\" x 1\" x 1\/4\" Aluminum Oxide Mounted Flap Wheels with 1\/4\" Shank","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.6 out of 5 from 43 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHIGH QUALITY - The unique design maintains a perfect mandrel balance to reduce operator fatigue and deliver a smooth, vibration-free performance.\u003c\/li\u003e\n\u003cli\u003eMATERIAL - Made with high-performance abrasive cloth from Germany for efficient grinding and a long lifespan.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Ideal for surface finishing, preparation, decorative finishes, edge blending, and chamfering.\u003c\/li\u003e\n\u003cli\u003eSIZE - 1 1\/2\" diameter, 1\" length, with a 1\/4\" shaft. Available in 40, 60, 80, 120, and 180 grit.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 5 PACK\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do mounted flap wheels fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Deburring, blending, and finishing in slots, bores, and tight areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Metal, stainless steel, wood, and many non-metallic materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I pick?\u003c\/strong\u003e\u003cbr\u003eA: Coarser grits remove more material; finer grits leave a smoother finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How many wheels come in this flap wheel set?\u003c\/strong\u003e\u003cbr\u003eA: This flap wheel set holds 5 aluminum oxide mounted flap wheels, each 1-1\/2\" in diameter and 1\" long on a 1\/4\" shank. The wheels are offered in 40, 60, 80, 120 and 180 grit. See all \u003ca href=\"\/collections\/die-grinder-abrasives\"\u003edie grinder abrasives\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this flap wheel set leave a smooth finish?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The wheels suit surface finishing, decorative finishes, edge blending and chamfering, and the finer grits leave a smoother finish than the coarse ones. A balanced mandrel keeps each wheel running smoothly and vibration-free, with less operator fatigue.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"40 Grit \/ 5 PC","offer_id":47964400484573,"sku":"1.5-1-14-0123-FW-40-5","price":14.99,"currency_code":"CAD","in_stock":true},{"title":"120 Grit \/ 5 PC","offer_id":47964400517341,"sku":"1.5-1-14-0823-FW-120-5","price":14.99,"currency_code":"CAD","in_stock":true},{"title":"180 Grit \/ 5 PC","offer_id":47964400550109,"sku":"1.5-1-14-1122-FW-180-5","price":14.99,"currency_code":"CAD","in_stock":true},{"title":"60 Grit \/ 5 PC","offer_id":47964400582877,"sku":"1.5-1-14-1122-FW-60-5","price":14.99,"currency_code":"CAD","in_stock":true},{"title":"80 Grit \/ 5 PC","offer_id":47964400615645,"sku":"1.5-1-14-1122-FW-80-5","price":9.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/bd931f8a.jpg?v=1777666788"},{"product_id":"wa-5pack-2-1-2x1x1-4-inch-industrial-grade-durable-mounted-flap-wheel-sander-aluminum-oxide-sanding-flap-wheels-with-1-4-shank-for-drill-die-grinder-remove-rust-and-polish","title":"2-1\/2\" x 1\" x 1\/4\" Aluminum Oxide Mounted Flap Wheels with 1\/4\" Shank","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.6 out of 5 from 5 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHIGH QUALITY - The unique design maintains a perfect mandrel balance, reducing operator fatigue and delivering a smooth, vibration-free finish.\u003c\/li\u003e\n\u003cli\u003eMATERIAL - Made with high-performance abrasive cloth from Germany for efficient grinding and a long lifespan.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Ideal for surface finishing, preparation, decorative finishes, edge blending, and chamfering.\u003c\/li\u003e\n\u003cli\u003eSIZE - 2-1\/2\" diameter, 1\" width, with a 1\/4\" shaft. Available in 40, 60, 80, and 120 grit.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 5 PACK\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do mounted flap wheels fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Deburring, blending, and finishing in slots, bores, and tight areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Metal, stainless steel, wood, and many non-metallic materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I pick?\u003c\/strong\u003e\u003cbr\u003eA: Coarser grits remove more material; finer grits leave a smoother finish.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"40 Grit \/ 5 PC","offer_id":47964401959133,"sku":"W25-1","price":11.99,"currency_code":"CAD","in_stock":true},{"title":"60 Grit \/ 5 PC","offer_id":47964401991901,"sku":"W25-2","price":11.99,"currency_code":"CAD","in_stock":true},{"title":"80 Grit \/ 5 PC","offer_id":47964402024669,"sku":"W25-3","price":11.99,"currency_code":"CAD","in_stock":true},{"title":"120 Grit \/ 5 PC","offer_id":47964402057437,"sku":"W25-4","price":11.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/624478d6.jpg?v=1777666836"},{"product_id":"wa-3pack-2-inch-emery-rubber-bristle-discs-assorted-grit-50-80-120-with-2-pad-holder-rubber-abrasive-brush-with-1-4-shank-deburring-grinding-polishing-wheel-for-die-grinder","title":"2\" Emery Rubber Bristle Discs – Assorted Grit with 1\/4\" Shank","description":"\u003cp\u003eWhitby Abrasives 2\" emery rubber bristle discs clean, deburr, and polish metal, wood, and plastic without gouging the surface. The flexible abrasive-impregnated rubber bristles conform to contours and run cool, ideal for rust and coating removal, edge work, and surface refinement. Assorted grit with a 1\/4\" shank for drills and die grinders. 3-pack.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFLEXIBLE - Abrasive-impregnated rubber bristles conform to flat and contoured surfaces.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Rust, paint, and coating removal, deburring, cleaning, and polishing.\u003c\/li\u003e\n\u003cli\u003eASSORTED GRIT - Coarse to fine grit for cleaning through to refinement.\u003c\/li\u003e\n\u003cli\u003eFITMENT - 2\" diameter with a 1\/4\" shank for drills and die grinders.\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 3 PACK.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What are emery rubber bristle discs for?\u003c\/strong\u003e\u003cbr\u003eA: Cleaning, deburring, and polishing metal, wood, and plastic without gouging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do they fit?\u003c\/strong\u003e\u003cbr\u003eA: Drills and die grinders that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What grits are included?\u003c\/strong\u003e\u003cbr\u003eA: An assorted range from coarse to fine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Will they damage the surface?\u003c\/strong\u003e\u003cbr\u003eA: No — the flexible rubber bristles run cool and refine without gouging.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"3 PC","offer_id":47964402811101,"sku":"NX-M7IN-N6Y3","price":25.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/8ae6d02d.jpg?v=1777666757"},{"product_id":"wa-3pack-nylon-flap-brush-4-coarse-medium-fine-80-120-240-grits-with-1-4-inch-shank-assorted-grits-coarse-medium-fine-aluminum-oxide-impregnated-nylon-bristles-for-die-grinder","title":"4\" Nylon Flap Brushes – Coarse, Medium \u0026 Fine 80\/120\/240 Grit, 1\/4\" Shank","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.1 out of 5 from 19 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHIGH QUALITY - More durable than standard wire brushes. Does not rust and is safer to use.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Removes surface rust, corrosion, oxidation, burrs, and old paint from metal and wood. Cleans unfinished tile and stone.\u003c\/li\u003e\n\u003cli\u003eSIZE - 4\" flap brush with 1\/4\" shank (Coarse 80, Medium 120, Fine 240 grit).\u003c\/li\u003e\n\u003cli\u003ePACKAGE - 3 PACK.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What are these nylon flap brushes for?\u003c\/strong\u003e\u003cbr\u003eA: Cleaning, deburring, rust and paint removal, and satin finishing on metal and wood.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do they fit?\u003c\/strong\u003e\u003cbr\u003eA: Drills and die grinders that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Why nylon instead of wire?\u003c\/strong\u003e\u003cbr\u003eA: Nylon won't rust or throw wires, runs cleaner, and is gentler on the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Which grit should I choose?\u003c\/strong\u003e\u003cbr\u003eA: Coarse (80) for heavier cleaning, medium (120) for general work, fine (240) for finishing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Can I use this abrasive nylon drill attachment on tile and stone?\u003c\/strong\u003e\u003cbr\u003eA: Yes, for cleaning unfinished tile and stone, as well as metal and wood. These abrasive nylon flaps also remove surface rust, corrosion, oxidation, burrs and old paint. The 1\/4\" shank fits a drill or die grinder. See all \u003ca href=\"\/collections\/die-grinder-abrasives\"\u003edie grinder abrasives\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"3 PC","offer_id":47964403794141,"sku":null,"price":29.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/7dd66af6.jpg?v=1777666732"},{"product_id":"5pack-tungsten-carbide-rotary-burrs-set-with-1-4shank-carving-bit-set-for-die-grinder-diy-metal-carving-wood-working-engraving-polishing-drilling","title":"Tungsten Carbide Rotary Burrs Set with 1\/4\" Shank","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.6 out of 5 from 5 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cp\u003eWhitby Abrasives tungsten carbide rotary burrs deliver fast, precise material removal on metal, hard wood, and other tough materials. The single-cut spiral flutes give controlled, smooth cutting with fewer burrs and a cleaner finish, and the durable tungsten carbide construction resists heat and lasts far longer than steel alternatives. This 5-piece set includes multiple profiles with a 1\/4\" shank for die grinders, rotary tools, and drills.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDURABLE - Premium tungsten carbide for high hardness, heat resistance, and long life.\u003c\/li\u003e\n\u003cli\u003eSMOOTH CUTTING - Single-cut spiral pattern for controlled, low-burr material removal.\u003c\/li\u003e\n\u003cli\u003eMULTI-SHAPE SET - 5 pieces with common profiles (such as cylinder, ball, tree, and oval) for shaping, deburring, contouring, and hollowing.\u003c\/li\u003e\n\u003cli\u003eFITMENT - 1\/4\" shank fits most die grinders, rotary tools, and electric drills.\u003c\/li\u003e\n\u003cli\u003eMULTIPURPOSE - Metalwork, woodworking, weld cleanup, automotive detailing, and crafting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What are carbide rotary burrs used for?\u003c\/strong\u003e\u003cbr\u003eA: Shaping, deburring, contouring, and material removal on metal, wood, and other hard materials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What tool do they fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders, rotary tools, and drills that accept a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What's included?\u003c\/strong\u003e\u003cbr\u003eA: A 5-piece set with multiple burr profiles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What materials can I work?\u003c\/strong\u003e\u003cbr\u003eA: Metal, stainless steel, hard wood, plastic, and aluminum.\u003c\/p\u003e\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"5 PC","offer_id":47964408316125,"sku":"A-032","price":49.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/72583387.jpg?v=1777666752"},{"product_id":"5-pack-3-x-2-interleaf-shank-mounted-flap-wheels-with-1-4-shank-copy","title":"3\" x 2\" Interleaf Shank Mounted Flap Wheels with 1\/4\" Shank","description":"\u003cp class=\"wa-rating-line\"\u003e\u003cstrong\u003eCustomer rating:\u003c\/strong\u003e 4.2 out of 5 from 27 customer ratings on our online marketplace store (November 2026).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-IN-1 ABRASIVE POWER - Alternating flaps of abrasive cloth and non-woven material for time-saving surface prep. The non-woven layers dissipate heat, preventing discoloration and burn marks on delicate materials.\u003c\/li\u003e\n\u003cli\u003eFITS MOST TOOLS - 1\/4\" shank mount attaches to die grinders and hand drills for fast, on-the-go finishing.\u003c\/li\u003e\n\u003cli\u003eSMOOTH, CONSISTENT FINISH - Produces a uniform satin or brushed finish on metals, plastics, and wood, even on curved or contoured surfaces.\u003c\/li\u003e\n\u003cli\u003eCOOL, BURN-FREE GRINDING - Non-woven layers reduce heat buildup and protect delicate surfaces.\u003c\/li\u003e\n\u003cli\u003eMULTI-MATERIAL - Effective on stainless steel, aluminum, brass, copper, wood, and composites. SIZE: 3\" diameter, 2\" thick, 1\/4\" shaft. 5 PCS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What tool do these fit?\u003c\/strong\u003e\u003cbr\u003eA: Die grinders and drills that accept a 1\/4\" shank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are they used for?\u003c\/strong\u003e\u003cbr\u003eA: Weld blending, rust removal, cleaning, finishing, and light polishing on metal, wood, and plastic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What makes interleaf wheels different?\u003c\/strong\u003e\u003cbr\u003eA: Alternating abrasive and non-woven flaps blend and finish while running cooler than cloth-only wheels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What materials can I use them on?\u003c\/strong\u003e\u003cbr\u003eA: Stainless steel, aluminum, brass, copper, wood, and composites.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Whitby Abrasives\u003c\/h2\u003e\n\u003cp\u003eWhitby Abrasives Inc. is a Canadian supplier of professional grinding, cutting, sanding, and finishing abrasives. We focus on consistent quality, fair pricing, and fast shipping across Canada so fabricators, welders, woodworkers, contractors, and DIYers get abrasives that perform job after job. Have a question about sizing or the right grit for your project? Our team is happy to help.\u003c\/p\u003e","brand":"Whitby Abrasives","offers":[{"title":"5 PC","offer_id":48181946581213,"sku":"4S-Y7PB-OFXE","price":35.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/2693\/0141\/files\/3_3a9f65d7-2d98-4ee0-82f9-1aa76f996005.png?v=1784232286"}],"url":"https:\/\/whitbyabrasives.ca\/collections\/die-grinder-abrasives.oembed","provider":"Whitby Abrasives Inc.","version":"1.0","type":"link"}